Single Board Computers
"Expansion I/O modules
Copyright © 2011 Mosaic Industries, Inc.
Mosaic embedded designs » Embedded controllers » Accessories for embedded computers & operator interfaces
Accessories for Mosaic Embedded Computers and Operator Interfaces
The Mosaic stepper motor (part no. STEPMOT-1) is a four phase, unipolar, permanent magnet stepper motor. It is a standard size, 200-steps-per-revolution, NEMA 17 (1.7 in. square footprint, 5 mm shaft diameter), 12 V motor. This motor, like most stepper motors is a permanent magnet motor. The Mosaic stepper is typical of common high resolution motors - a full revolution requires 200 steps, while each step turns the shaft only 1.8 degree for a full step, or 0.9 degree in half-stepping mode. This sized motor is commonly used in household appliances, medical equipment, stage lighting devices, and in various industrial control applications.
Mosaic Stepper Motor Specifications
Controlling Stepper Motor Using the Power I/O Wildcard
How to Order
Mosaic Stepper Motor
A four phase, unipolar, permanent magnet, standard size, 200-steps-per-revolution, NEMA 17 (1.7 in. square footprint, 5 mm shaft diameter), 12 V stepper motor.
We offer the following cables and adapters to facilitate prototyping and product development
6 V Power Supply and Cable
Wall transformer delivers 6VDC @ 500mA to power the QED Board.
9 V Power Supply and Cable
Wall transformer delivers 9VDC @ 1000mA to power the Docking Panel.
14 V Power Supply and Cable
Wall transformer delivers 14VDC @ 1000mA to power the QScreen Controller or Docking Panel.
24 V Power Supply and Cable
Wall transformer delivers 24VDC @ 800mA to power the Mosaic Handheld.
9 Pin QED Serial Communication Cable
Interfaces the onboard QCard and PDQ Board serial header to two 9 pin female RS-232 connectors.
9 Pin PC Serial Cable
Interfaces the 9 pin female RS-232 connector on the Docking Panel or QScreen to a 9 pin male PC RS-232 connector.
25 Pin I/O Cable
Interfaces the 25 pin female DB-25 connector on the Docking Panel to a 25 pin male DB-25 connector.
9 Pin Female to 25 Pin Male Adapter
Allows the 9-pin PC serial cable (Part No PCC9-232) to connect to the Mosaic Handheld's bottom-mounted DB-25M I/O connector.
USB to RS-232 Adapter
Connects any PC's USB2.0 port into an RS-232 DB-9 port for connection to any Mosaic controller. Includes software drivers for WIN98/2000/XP.
Prototyping Cable Set
Includes two 12"-long flat ribbon cables with 24-pin IDC connectors; 36"-long flat ribbon cable; and four 24-pin IDC sockets for custom cable manufacturing